Nashville, TN – From Friday September 21st through Wednesday September 26th, (excluding weekends), 9:00am-3:00pm, there will be alternating lane closures on State Route 11 (U.S. 41) in order to mill, pave and stripe the roadway between mile marker 2.0 and mile marker 3.0.

One lane will remain open.

Cheatham, Montgomery, Robertson & Sumner Counties

From Friday September 21st through Wednesday September 26th, (excluding weekends), 9:00am-3:00pm, there will be periodic lane closures in each direction on I-24 from the 14 mile marker to the 32 mile for chemical control of vegetation.

This will be a moving operation.

TDOT Maintenance – Middle Tennessee

From Friday September 21st through Wednesday, September 26th, 9:00am-3:00pm, (excluding weekends), there will be possible lane closures at various locations on State Routes and Interstates in Middle Tennessee to patch potholes on an as needed basis:

• I-24 Cheatham, Davidson, Montgomery and Robertson Counties
• I-65 Davidson, Robertson, Williamson Counties
• I-40 Cheatham, Davidson, Dickson, Hickman, Humphreys Counties

Davidson County

From Thursday September 21st through Wednesday September 26th, 9:00am-3:00pm, and 7:00pm-1:00am, there will be various shoulder closures in Davidson County for rock removal on all interstates. All lanes will remain open.

From Thursday September 21st through Wednesday September 26th, 8:00pm-1:00pm, there will be alternating lane closures on Broadway/West End Avenue from I-40 to I-440 for crack sealing. One lane will remain open.

On Thursday September 21st, 8:00pm-1:00am, there will be alternating lane closures at the intersection of Donelson Pike and Murfreesboro Road for milling and paving. One lane will remain open.

On Tuesday September 25th, 7:00pm-3:00am, there will be alternating lane closures at the intersection of Gallatin Road (State Route 31) and Conference Drive for milling and paving. One lane will remain open.

Cheatham County

From Thursday September 21st through Wednesday September 26th, (excluding weekends) 9:00am-3:00pm, there will be alternating lane closures on State Route 49 in both directions in order to mill, pave and stripe the roadway between mile marker 0 (Cheatham County and Dickson County line) and mile marker 1.0 also between mile marker 3 and mile marker 4. One lane will remain open.

From Thursday September 21st through Wednesday September 26th, (excluding weekends) 9:00am-3:00pm, there will be alternating lane closures on State Route 249 in both directions in order to pave and stripe the roadway between mile marker 0 and mile marker 0.5. One lane will remain open.

From Thursday September 21st through Wednesday September 26th, (excluding weekends) 7:00pm-5:00am, there will be one lane periodically closed on I-40 in both directions in Cheatham County between mile marker 186 and mile marker 192 in order to patch potholes in the concrete bridge decks. One lane will remain open.

Dickson County

Bridge Repair I-40 over Nails Creek (MM 177.8) and Turnbull Creek (MM 179.9)

From Thursday September 21st, 8:00pm through Monday September 24th, 6:00am, there will be alternating lane closures on I-40 eastbound and westbound for paving operations and bridge deck repair. (There will be no closures on I-40 eastbound on Saturday 11:00am to 3:00pm and Sunday 8:00am-12Noon.)

Humphreys County

On Tuesday September 25th and Thursday September 27th, 6:00pm-3:00am, there will be alternating lane closures on I-40  eastbound between mile marker 143.0 and mile marker 149.0 for milling and paving. One lane will remain open.

Tennessee Department of Transportion

Motorists are encouraged to use caution and obey reduced speed limits in all TDOT work zones, regardless of lane closure activity. Information in this report is provided to the Department of Transportation by the contractors. Most work is weather dependent and subject to change due to inclement weather.

For more information on this or any other TDOT road construction project or to view travel conditions in this area visit the TDOT SmartWay Information System ^[3] web site ( http://www.tn.gov/tdot/tdotsmartway/ ^[3] ). People can also dial 511 from any land-line or cellular phone to access up to date traffic conditions, or visit www.TN511.com ^[4] ( http://www.tn511.com/ ^[5] ). TDOT is also now on Twitter.

For up to date traffic tweets for the Nashville area follow Nashville511 ( http://twitter.com/nashville511 ^[6] ) on Twitter.  For statewide traffic tweets just follow TN511 ( http://twitter.com/TN511 ^[7] ).  Motorists are reminded to use all motorist information tools responsibly.

Drivers should refrain from texting, tweeting or using a mobile phone while operating a vehicle.

TDOT advises drivers to “Know before you go!” by checking traffic conditions before leaving for your destination.